- Περιγραφή
- Ερευνα
Περιγραφή
Δείκτης ροής τήξης
Introduction of Melt Flow Indexer:
To determine the melt mass-flow MFR (g/10min), the melt volume-flow rate MFV(εκ3/10εορτασμός)and the melt density of thermo resin, for the engineering plastics of polycarbonate, nylon and fluorine plastics, και τα λοιπά, whose melt temperature are higher, but also fit for the plastics tests of polyethylene, polystyrene, polypropylene, ABS resin and poly-formaldehyde resin, και τα λοιπά, whose melt temperature are lower, it is widely applied to the fields of plastics materials, product, petrochemical
Πρότυπα:
Melt Flow Indexer standards: GB 3682, ISO 1133, ASTM D 1238, DIN 53735, UNI-5640, JJB878, and made according to JB/T5465 (Technical Standard of Melting Flow Rate Instrument).
Tests performed:
Adopts PID temperature control, digital display, it can cut material automatically, has two measuring method, MFR and MVR, print out the test report
Main technical parameter of Melt Flow Indexer:
Measuring range: 0. 01-600.00 g/10min (MFR)
0. 01-600.00 cm/10min(MVR)
0.001-9.999 g/cm (melt density)
Temperature range: 50-400°C
Temperature precision: ±0.5°C resolution: 0.1°C
Material canister inside diameter 9.55±0.025mm length: 160mm
Piston diameter 9.457±0.01mm mass: 106σολ
Mould inside diameter 2.095mm length: 8±0.025mm
Load: full load
Base weight: 0.325Kg.
Weights: 0.875Kg, 1.290Kg, 1.835Kg, 3.475Kg, 4.675Kg, 5.000Kg, 5.000Kg one each (may freewill combination )
Ακρίβεια: 0.5%
Cleaning accessories: clear material pole
Calibration accessories: water level bubble
Measuring method: MFR MVR/ DENSITY
Supply Power: 220V±10% 50Hz Heat up power: about 550W
Outline size: (length*width*height ) 600*400*500 (unit: mm)
Net weight: 85Kg Gross weight: 135Kg
UL 651 Πλαστικός ελεγκτής πρόσκρουσης βάρους χωρίς πτώση
Για περισσότερες πληροφορίες, Παρακαλώ επικοινωνήστε μαζί μας:
Τζέρι Ζανγκ
Κινητό: +86-13853148617
Βυθός & WhatsApp: +86-13853148617
ΗΛΕΚΤΡΟΝΙΚΗ ΔΙΕΥΘΥΝΣΗ: sales06@victorytest.com
Δικτυακός τόπος: http://www.victorytestgroup.com
