용융 흐름 인덱서

설명

용융 흐름 인덱서

Introduction of Melt Flow Indexer:

To determine the melt mass-flow MFR (g/10분), the melt volume-flow rate MFV(cm³/10분)and the melt density of thermo resin, for the engineering plastics of polycarbonate, nylon and fluorine plastics, 등, whose melt temperature are higher, but also fit for the plastics tests of polyethylene, 폴리스티렌, 폴리프로필렌, ABS resin and poly-formaldehyde resin, 등, whose melt temperature are lower, it is widely applied to the fields of plastics materials, product, 석유화학

표준:

Melt Flow Indexer standards: GB 3682, ISO 1133, ASTM D 1238, 에서 53735, UNI-5640, JJB878, and made according to JB/T5465 (Technical Standard of Melting Flow Rate Instrument).

Tests performed:

Adopts PID temperature control, 디지털 디스플레이, it can cut material automatically, has two measuring method, MFR and MVR, print out the test report

Main technical parameter of Melt Flow Indexer:

측정 범위: 0. 01-600.00 g/10분 (MFR)

0. 01-600.00 cm/10min(MVR)

0.001-9.999 g/cm (melt density)

온도 범위: 50-400℃

Temperature precision: ±0.5°C resolution: 0.1℃

Material canister inside diameter 9.55±0.025mm length: 160mm

피스톤 직경 9.457±0.01mm 질량: 106g

Mould inside diameter 2.095mm length: 8±0.025mm

짐: full load

Base weight: 0.325kg.

Weights: 0.875kg, 1.290kg, 1.835kg, 3.475kg, 4.675kg, 5.000kg, 5.000Kg one each (may freewill combination )

정확성: 0.5%

Cleaning accessories: clear material pole

Calibration accessories: water level bubble

Measuring method: MFR MVR/ DENSITY

공급 전원: 220V±10% 50Hz Heat up power: about 550W

외곽선 크기: (length*width*height ) 600*400*500 (unit: mm)

순중량: 85Kg Gross weight: 135kg

UL 651 플라스틱 자유 낙하 중량 충격 시험기

더 많은 정보를 위해서, 문의하시기 바랍니다:
제리 장
이동하는: +86-13853148617
위챗 & 왓츠앱: +86-13853148617
이메일: sales06@victorytest.com
웹사이트: http://www.victorytestgroup.com